1. AC Power Adapter
Although U2SCX can work with the term power provided from the SCSI device, there are some devices that does not provide sufficient term power. And some SCSI device does not provide the term power at all. In these cases, you will need to have an external AC apadter for the U2SCX.
The U2SCX requires DC 5V/2A. Here is the required specification for the AC adapter. If you have a compatible adapter, that should work just fine. But we cannot guarantee the compatibility with third party adapters.
'Positive Tip polarity'(center "+", external "-"),
4.0 x 1.7 mm Tip and DC 5V / 2A
If you are not sure if your SCSI device provides enough term power to drive U2SCX, you can order the apadter with the U2SCX and return for refund if not needed.
If the green LED on the U2SCX lights when connected to the SCSI device, then you will not need the AC adapter. If the LED does not light, you need the adapter.
2. SCSI connector exchanger.
There are several different types of SCSI connectors. The signals are the same, but if your connector does not match with the U2SCX, you will need a connector exchanger. The U2SCX has a High Density 50P Male SCSI connector. Please check your SCSI device's connector type before ordering and add the adapter if needed.
The High-Density 50F side connects to the U2SCX and the other side goes directly to the back of your SCSI device.
Add U2SCX to the shopping cart and proceed to checkout: |
|
