Location : English | Japanese
TOPIC PATH : HOME > Products > USB to Serial Convertor USB60F (USB Std.A type)
PRODUCTS
USB to Serial Convertor - USB Std.A type
img
USB60F
  • Connect RS232C serial devices such as barcode scanner, magnetic card reader with serial interface via this converter.
  • - USB60F is a USB to serial converter.
    - Up to 230.4Kbps data transfer rate.
    - Standard USB (A type Male) connector.
    - Virtual COM port driver USB60F can be used with FTDI's VCP drivers to provide a COM port on a PC.
    - Power/Transmit/Receive LED indicators
    - Bus powered. no need external power supply



System Requiremnets

Supportted Computer

- Windows PC with free Standard USB A type ports.

Supported Operating System

- Windows10, Windows8.1, Windows8, Windows7, Windows Vista
- Windows Server 2012 R2, Windows Server 2012, Windows Server 2008 R2, Windows Server 2008.

*Also works on 60bit version.

Specifications

Hardware specifications

Product Name USB60F
Serial Input/Output level RS-232C level
USB Specification USB(Universal Serial Bus) Specification Rev. 1.1
Connector USB Standard USB A male
RS-232C D-Sub9 male (with anchor [#4-40])
Number of I/O ports 1 port
Unit Dimensions 3.35[L] x 1.1[W] x 0.43[H] in (85[L] x 28[W] x 11[H] mm)
Cable Length Approx. 2.83 ft (85 cm)
Weight 0.194 oz (55 g)
Data transfer mode Asynchronous (Start stop synchronization)
Data transfer Rate (Baud) 300/600/1,200/2,400/4,800/9,600/19,200/38,400
57,600/115,200/230,400 bps
Transmit Distance Within 50ft (15 m)
Power Voltage DC+5V (Powered for USB Bus)
Power Consumption Average: 36mA(5V) Max.: 60mA(5V)
Serial Parameter Data bit: 7/8 Start bit:1 Stop bit: 1/2
Parity bit: even/odd/none
RS-232C connector D-SUB 9PIN RS-232C connector Male
ANSI / EIA / TIA-574
LED Indicators PWR:Power LED
If the power from USB bus is properly supplied 5V,
this indicator LED will be on.
TXD:Transmit data indicator (Host to Device)
RXD:Receive data indicator (Device to Host)
Operating Environment Temperature
0 to 50 degrees Celsius
Humidity 10 to 90% (non condensing)
Storage Environment Temperature -20 to 65 degrees Celsius
Humidity 10 to 90% (non condensing)

Note:

1. Do not remove while the application is communicating. System will be unstable.
2. Do not operate to suspend. System will be unable to resume properly.
3. This product does not support the serial mouse for connecting to RS-232C port.

Product Overview

USB60F OV

The pin assignment of the connector.

Pin
#
Signal name Direction DTE - DCE Meaning
1 DCD « Data Carrier Detected
2 RCD « Received Data
3 TXD » Transmitted Data
4 DTR « Data Terminal Ready
5 GND - Signal Ground
6 DSR « Data Set Ready
7 RTS » Request to Send
8 CTS « Clear to Send
9 RI « Ring Indicator
Service & Support